To begin a tile installation, divide the room into smaller grids. The tile area should be about 2′ x 3′, spaced evenly. A straightedge is a good tool to use to create even gaps between tiles. Start with the center and work your way outward to the walls and ceiling. Tape the tiles into place with a rubber mallet or wood block to ensure a good bond and level plane. Next, clean up any excess adhesive.
The first step in the installation process is to mark the area to be tiled. Most professionals charge per square foot. The larger the area, the lower the cost per square foot. If you have a 10-foot-wide room, multiply the length by the width. This measurement will give you the approximate square footage needed for the installation. Always overestimate the area by a few square feet so that you can account for broken tiles and odd-shaped cuts.
Once you have the plan, visit a tile store to purchase the tile. You can also find information on professional tile installation at home improvement companies. Before you visit a tile store, sketch out the floor plan and take a picture of the floor in a doorway. This will help the salesperson recommend the appropriate transition. Different types of transitions are available. In addition to a solid cement backer board, consider a thin set of screws to anchor the tiles in place.
If you are not sure how to start your tile installation, it may be a good idea to seek professional help. Many tile stores have experienced employees that can help you lay the tile. Before you go to the store, you should draw out a floor plan or take a picture of the floor of a doorway. This will help the salesperson recommend the appropriate transition, which will be an added benefit to your new floor. They can help you determine the right size and style.
Before beginning a tile installation, make sure the subfloor is stable. Plywood is not recommended for tile installation because it expands and contracts and can cause a wall to buckle. Concrete is a better choice for a subfloor. You can also use backer boards. If you’re not sure whether you should use cement board, consult a professional to see how it will affect the rest of the floor. If you don’t have a solid subfloor, you should consider using plywood or a cement board.
Before starting a tile installation, check the existing flooring. It must be structurally sound to avoid any problems. Before starting a tile installation, be sure to clean the floor thoroughly and dry the tile for at least 24 hours. When the substrate is dry, you must make sure to allow 24 hours for it to dry. When you finish the process, you can grout the tiles. For the best results, ensure that the tile is level and has a smooth surface.